How to configure a Wireless Microphone

Updated on 02 Jan 2024
1 Minute to read

Share
Dark
Light
PDF

Article summary

Did you find this summary helpful?

Thank you for your feedback

Note:

This article showcases features that are typically only made available to Administrator roles.

However, since Getac Enterprise is highly configurable, the ability to complete tasks described in this article may be different for each User, depending on policy. Please contact an administrator with all access questions and concerns.

Overview

This article covers the configuration of the Trinus wireless microphone for use with the MVS.

Configure Audio Settings

Perform the following steps to configure DVRs to use the wireless microphone:

Log into Getac Enterprise.
Access the Unit Configuration by one of the two methods:
1. Via the Detailed Unit Page.
2. Via the Unit Configuration Template Page.
Access the Devices sub-page.
By default, the Video tab will load.
Click on the Audio tab to the right of the Video tab configured previously.
Example:
Ex. Audio Tab
Click on the Add button
Example:
Ex. Add button
Give the new Audio device a name, e.g. Wireless.
Example:
Ex. Add audio device name
From the Device dropdown menu, select Microphone (Realtek High Definition Audio).
Example:
Ex. Select audio device
Provide the following device values:
1. Channel Number - 1.
2. Volume - 75.
3. Power Pin - 0.
4. Index - Leave Blank.
  Example:
  Ex. Device Values
Once finished, click on Save to finalize.

Note:

To add the wireless microphone as the audio capture device tied to a camera, see one of the articles related to the camera(s) purchased by your agency:

Was this article helpful?

What's Next

Share GPS from Cradlepoint IBR1100 to a DVR

Table of contents

Overview