- 18 Oct 2023
- 2 دقائق للقراءة
- داكنضوء
- PDF
Audio-Only Recording
- تحديث في 18 Oct 2023
- 2 دقائق للقراءة
- داكنضوء
- PDF
Overview
This feature allows for capturing an audio recording without video.
This is useful for the following:
- Interviews.
- If the operator is in an area, e.g. a hospital, that has specific restrictions for privacy.
- When responding to an incident involving minors or domestic issues.
Start Audio-Only Recording
To start recording, press and hold the center button for approximately 5 seconds.
The following occurs once a recording has started:
- The camera will say, "audio only."
- The recording status LED will begin to blink, alternating between red and orange. See here for an example.
- If enabled, any Pre-recorded event will be added to the recording automatically.
- The LED lights and audible cues will not function while the BWC is in Covert Mode.
- The BWC can be configured to beep at a specified interval while recording. See here for more information.
- If used in conjunction with Pre-record, there will be video for a brief period of time prior to the audio recording. This is visible during playback.
- The camera will not say, "Categorize" if the wheel is disabled.
Stop Recording
To stop recording, press and hold the center button for approximately 3 seconds or until the camera says, "audio stop."
The following occurs once a recording has stopped:
- The recording status LED will turn off. See here for an example.
- If enabled, Pre-record will begin automatically at the specified interval.
Training Video
Watch the video below to see how this process works:
Chapters:
- 00:00-00:17 - Introduction
- 00:18-00:38 - Start Audio-Only Recording
- 00:39-00:48 - Stop Audio-Only Recording
- 00:49-01:14 - Category Wheel